This article shows how one can configure the Pre-Install Summary Panel such that the features defined in CHOSEN_INSTALL_FEATURE_LIST variable are displayed in new lines.
Q207015: HOWTO: Make Features Appear In New Lines In Pre-Install Summary Panel
↧
↧
Q207211: App Portal Website displays "The site is currently offline."
Issue: When under a Standard User/Normal user account with standard user privileges, The following error message is displayed when attempting to access the App Portal webpage:
"The site is currently offline"
Cause: The site has not yet been enabled for normal users/standard accounts.
Resolution: Make sure the "Enable Site" checkbox is marked in App Portal (log under administrator App Portal account) by following these steps:
1. Log under your administrator user account.
2. Login to the App Portal webpage.
3. Click on the "Admin" tab.
4. Under the Site Management, click on "Settings".
5. Click on the "General" tab and you should see an "Enable Site" option.
6. Mark the checkbox and click on the "Save" button (right above the General Tab).
7. Go back to the client machine, login as a standard user and attempt to access the App Portal webpage again.
↧
Q212715: ERROR: 27555
Error: 27555. Error attempting to apply permissions to object [1]. System error: The system cannot find the path specified.
[1] is the location of the file that the permission is being set on.
↧
Q201149: ERROR: Retrieving the COM class factory for component with CLSID {0E59F1D5-1FBE-8FF2-00A0D10038BC} failed due to the following error: 80040154
On logging onto the AdminStudio Enterprise Server (AES)/Workflow Manger (WFM) through Internet Explorer, one may see the error -
Server Error in '/' Application.
Retrieving the COM class factory for component with CLSID {0E59F1D5-1FBE-8FF2-00A0D10038BC} failed due to the following error: 80040154
↧
Q108466: ERRDOC: Build Error 6207
When building an InstallShield project, the following error may occur:
"Error -6207: An error occurred building Setup File [1]"
Alternatively, this error may appear as follows:
"Error -6207: An error occurred building Setup File [1]. The file does not exist in the specified location. Check the path to make sure it is correct."
[1] is a placeholder that contains the filename that caused the error.
↧
↧
Q107728: ERRDOC: Build Error 5023
When building an InstallShield project, the following error may occur:
Error -5023: Error building File table.
↧
Q107116: ERRDOC: Build Error 5014
While building an InstallShield project, the following error occurs:
'Error -5014: An error occurred building icon [ICONNAME]. The specified icon key was not found in the icon table'
[ICONNAME] contains the name of the icon file in the project causing this error.
↧
Q109557: ERRDOC: Build Error 6041
Building an InstallShield project, produces the following error occurs:
Error -6041: Internal build error.
↧
Q211088: ERRDOC: Build Warning 6245
When building an installation, the following error may occur:
Warning -6245: One or more of the project's components contain .NET properties that require the .NET Framework. It is recommended that the release include the .NET Framework.
↧
↧
Q107573: ERRDOC: Build Warning 4301
When building an InstallShield project, the following error may occur:
'Warning -4301: Could not find the .msi file <MSIFILE> for key synchronization.'
↧
Q107607: ERRDOC: Build Warning -6135
When building an InstallScript or InstallScript MSI project type, the following error may occur:
Warning -6135: The specified feature [2] is not associated with any Setup Type.
[2] is a placeholder that contains the name of the feature that is not associated with a Setup Type.
↧
Q210388: HOWTO: Display of Suite Controls Based on Feature Selection
Each suite control has both Visible and Enabled field that hides or greys out the control if the provided condition is not true.
↧
Q210546: HOTFIX: 4.5 .NET Framework Setup Prerequisite file fails to download
After installing Service Pack 1, when Microsoft .NET Framework 4.5 Full or Microsoft .NET Framework 4.5 Web Prerequisite is selected to be downloaded in from within the InstallShield 2012 Spring IDE, the following error is encountered:
The download failed; make sure you are running as Administrator, and that your machine is connected to the Internet. Would you like to try again?
In the download results pane, the following message is displayed:
The checksum of file dotnetfx45_full_x86_x64 is incorrect. Please try downloading the Merge Module or Object again
↧
↧
Q210468: HOWTO: Prevent Shortcuts from being Pinned to the Start screen
This article discusses preventing shortcuts created during installation from being pinned to the target system's Start screen.
↧
Q106362: INFO: Successfully Authoring a Patch
This article discusses rules one must follow to successfully author a patch. Failure to follow these rules can cause unpredictable and erroneous behavior during installation of the patch.
↧
Q113727: HOTFIX: Beta Support for Visual Studio 2008
This article applies to InstallShield 2008. Flexera Software no longer provides support for Installshield 2008 but as a courtesy we have left this document for any remaining Installshield 2008 users. Please read Flexera Software's end of life policy document for more information on Flexera Software's policy as well as the end of life announcement for more information. In order to continue receiving support please upgrade to our latest version. Thank you for using Installshield.
When attempting to integrate InstallShield 2008 with Visual Studio 2008, the InstallShield projects may not appear in the Visual Studio IDE.
Additionally, the following source control–related issues were resolved in this hotfix:
- 1-J2839: InstallScript context help does not work in the InstallScript view when InstallShield is used from within Visual Studio.
- IOC-000005921: Setup Design tab is not refreshed until the view is reopened in Visual Studio 2005.
- IOC-000047606: Blank solutions in Visual Studio do not work with Visual SourceSafe and InstallShield.
- IOC-000052315: Checking in and checking out solutions that include InstallShield projects does not work as expected.
- IOC-000053322: Attempting to change source control settings in Visual Studio with InstallShield results in an error message.
↧
Q107463: HOTFIX: Hotfix Available for InstallShield Developer 8.0 Users
Flexera Software no longer provides support for Developer 8.x but as a courtesy we have left this support document for any remaining Developer 8.x users. Please read Flexera Software's end of life policy as well as the end of life announcement for more information. In order to continue receiving support please upgrade to our latest version. Thank you for using InstallShield.
A hotfix has recently been released to address several key issues with InstallShield Developer 8.0. These include several issues with skins, multilingual setups, and the QuickPatch project type.
↧
↧
Q100057: HOWTO: Installing and Uninstalling Fonts In Installshield Professional 5.x
Flexera Software no longer provides support for Professional 5.x but as a courtesy we have left this document for any remaining Professional 5.x users. Please read Flexera Software's end of life policy document for more information on Flexera Software's policy as well as the end of life announcement for more information. In order to continue receiving support please upgrade to our latest version. Thank you for using InstallShield.
↧
Q201449: ERRDOC: The Imported Project Was Not Found Build Error
When building a Visual Studio solution that contains an InstallShield 2012 Project, the following build error might be encountered:
C:\Builds\3\Test Project\WFA\Sources\VS2010Projexts\WFA\Setup1\Setup1.isproj (29): The imported project "C:\Program Files (x86)\MSBuild\InstallShield\2011\InstallShield.targets" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk.
↧
Q207667: ISSUE: After Upgrading an InstallShield Project, TFS Build Fails With Error, "InstallShield.targets was not found"
If a Visual Studio solution originally contains either an InstallShield 2011 or InstallShield 2012 project and the InstallShield project is upgraded to InstallShield 2012 Spring, the following error may be encountered when building using Team Foundation Server (TFS):
"TestProject.isproj (51): The imported project "C:\Program Files (x86)\MSBuild\InstallShield\2011\InstallShield.targets" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk."
↧
More Pages to Explore .....
